Showing posts with label Learning. Show all posts
Showing posts with label Learning. Show all posts

Friday, June 12, 2009

I Finally Start To Understand Flash and Pentax Wireless Flash Options

OK, it took a while, but I'm finally starting to really think I "get" flash, flash options, and the Pentax solutions that are out there. I pointed to this article on ok1000 last year, but thought that after the last 4 hours of hunching over a laptop with PDFs of flash and camera manuals open, a very ghetto "studio" (I started typing in "stupid" just then... ironic) setup with knickknacks as a subject I should write down a few things.

Playing With Flashes
The setup I was using. Click through for notes.


Michael covered things really well in the OK1000 article, but sometimes you just have to do them yourself, by hand, with and without the manual to really get them in your head. Here's what I learned. Oh, first, equipment. The Pentax K20D of course, and the AF360FGZ flash unit, a laptop with USB cord for tethered shooting (more on that in a later post), and a big cup of tea (earl grey, hot) to keep me sane.
  • The "SB" mode is really only useful if you want to keep the flash on the camera but not use it for anything other than a focusing aid. Seems useful to me only in situations where you're testing things and don't want to be yanking it on and off the camera a lot, or turning it on and off and on again.
  • There are two wireless "slave" modes, 1 and 2. In mode 1 the flash works with Pentax equipment, in mode 2 it works as a triggered slave with non-Pentax gear. So if you're taking your 360 over to a friends house, and he has a Nikon setup and wants to use your flash, remotely triggering it with the flash output from his camera, you need slave mode 2.
  • With wireless flash you will always need to fire the remotes with the built in pop-up flash (or another flash on the camera). There's a custom option (29) to set whether or not the output from the pop-up flash is used only for control of the remote flashes (set custom option 29 to off) or if you want it to be used for flash compensation, so both the pop-up and the remote flash contribute to the image (ie: a bit of fill in flash from the pop-up flash) (set custom option 29 to on).
  • Some settings are done on the camera (slow sync speed mode) and some are done on the flash unit (first/second curtain). Some are confusing as well because the flash has a mode switch setting for first/second curtain, but under the flash options on the K20D there's also a second curtain mode. I believe the latter doesn't work with an external flash, only the on camera flash.
  • Some functions are only available in some exposure modes. For example, high speed sync mode isn't available in the Av exposure mode, only Tv.
  • Some functions will only show up in certain circumstances. For example, if you set your flash to the HS (High speed Sync) mode, the little "HS" in the LCD will only show up after you set your aperture past the sync speed of 1/180th.
  • In some exposure modes with the Flash attached, one of the wheels suddenly starts controlling the ISO. If you're like me and always forget which the front wheel does and which the rear one does, keep an eye out for this!
  • You can get very interesting using +/- EV for both the camera and the flash. IE: To raise the overall image light, set +EV on the camera, but then you can dial down the flash so it doesn't over power your subject. Or something like that. This is more a "when do I use what where" type of thing that I'm still working on.
So those are the cliff notes for my setup, and a bunch of my learning process (read: failing, cursing, trying again, failing, cursing, reading the manual, doing it, failing, reading the right section of the manual, and finally succeeding).

So why would you use various flash modes and what affects what in them. First the easy ones.

Slow Sync Mode
Used when the backdrop is darker. Allows you to "drag the shutter" to let more light in so the background lights up as well as the "flashed" main subject. This is where you want to adjust first or second curtain settings.

Useful for images of moving objects with a sense of speed or motion to them. IE: a dancer frozen at the peak of a jump, but with blurred leading lines. Also good to play with for dimly lit areas. David Hobby of Strobist fame uses the term "burn in", which evokes a great image of the rest of the background slowly embedding itself onto the sensor, like using a spray paint can without moving it and waiting for what you're pointing it at to become solidly filled in.

High Speed Sync
The opposite of slow sync really. Used if you want faster shutter speeds than the 1/180th or 1/250th that your camera allows. Useful for things like freezing fast action without any leading blur. Also for adjusting how much of a shot is lit. If you want to photograph a person or baby or something and not have the background lit up, only the foreground, then this is where you play.

On the back of the 360 flash it shows a guide line of what distance your flash is being effective at, it'll shrink drastically if you start pusing the shutter speed to 1/1000 or higher.

First / Second Curtain
Classic example is a moving car. First curtain flash will freeze the car but have the blur "trail" moving forward, because the flash fires as soon as the shutter opens. Second curtain fires at the end, so your moving car would be a blur line moving to a frozen image.

Adjusting Your Aperture
This controls the ambient light. A larger f-stop number (ie: f/13) will let less ambient light in, so your background is going to be darker. A smaller f-stop number (ie: f-4.0) lets more background light in, so the background is lighter.

Adjusting Your Shutter Speed
This controls the main subject. Faster or slower shutter will give you different effects in terms of the high/slow speed sync as above.

Getting a Reading
I'm now treading way into "mostly guessing" territory. Lets say you want to light a subject in a not well lit room. My guess would be take a flash-less meter reading, and see what the exposure should be. Lets say 1/4 @ f/5.6. So that's the ambient exposure. Now you're adding a flash on, so you're exposure will be something like 1/180th @ f/5.6. This is where you pick click off this site and read this exercise on Strobist 102, where David makes way more sense than me.

In fact, now I have myself setup with a nicely reproducable system, I'm about ready to start going through the Strobist classes and not be fumbling around wondering why my flash isn't firing!

Thanks for reading this far folks!

Tuesday, May 27, 2008

Experiments with the Orton Effect in Photoshop

After my post a couple of days ago about discovering the Orton Technique I found a couple of shots I thought were good candidates to play around with it on. I did the first image, liked it so much I immediately recorded the action and then applied it to a couple of other images. It's a bit gimmicky yes, but if you've got a bit of a "meh" shot, maybe something like this can take it up a notch and give the right scene that dreamy quality.

This first image was "Ok", a shot of the edge of Whonnock Lake. It's got a bit of an S-curve, follows the rule of thirds fairly well, and has something off on the right (the floating dock). I'd have liked something a bit more in the foreground, but hey, I'm still learning. The main issue with this image I think is it's fairly flat (though feel free to tell me how it'd have been improved).

Orton Experiment 1 (Before)

Running it through the orton action gave me what's below.

Orton Experiment 1 (After)

While still not a winner compositionally, note how things pop out, especially the green, and how the right hand side is filled in with reflections from the trees. The sky in the lower part of the image also doesn't seem to get as lost with a bit of contrast between it and the green of the tree reflections in the water.

A second test is below. Before image:

Orton Experiment 2 (Before)

And after:

Orton Experiment 2 (After)

Again the after image still needs "something" (maybe a different color, or object of focus), but it's gone from a boring picture of green, to a mash of all shakes of green and black. Note that the method of using screen and multiply blend methods left the lower left of this image fairly "hot" so I toned it down with a levels adjustment restricted with a layer mask to only the very bright areas.

To do this on your own images, just hit this great tutorial page on pic.net and follow it as written, works great!

Comments or suggestions appreciated as always (assuming I have more than 3 readers of course)!

Saturday, May 10, 2008

My First "Sweet 16" Portrait Shoot

A while back an ex-coworker from a job ago emailed me to ask if I'd take portraits of her daughter's "Sweet 16" party. The description was fairly vauge.... "fun shots of the kids dressed up". Since this was a friend of mine, and because my experience with portraiture is practically nil, I of course immediately said "let me get back to you" :) After a while I of course agreed, and this afternoon I went out to their country home to "shoot the kids".

First the good stuff. The kids were awesome, patient and willing to go along with this weird guy taking pictures of them, and I'm glad that their mom was there as she was able to corral everyone nicely and move from place to place... lets just say she knew what she wanted and dammit her daughter's sweet 16 was going to be perfect! The environment was great as well, their yard is beautiful, and being spring had flowers and blooms everywhere.

However, for lighting, the conditions couldn't have been worse, especially for a newbie like me. First of all it was overcast, and as I chose to shoot with a flash this meant that these shots had a dark background. The kids were nicely exposed, but they were sitting in a pool of light with bladk behind them.

Speaking of kids, they were about as contrasty as you can get, 4 white kids in black tuxes and dresses... also one of them didn't have a tux jacket so he just had a white shirt on.... about the same challenge that a wedding photographer has with a black tux next to a white wedding dress.

My flash (the AF360FGZ) did it's best, but either it or it's operator seemed to manage to underexpose about every image by about 2.2 stops :( Maybe it was the black tuxes, operator error.... It just seemed that the shots were all really dark, or they had white blobs of overexposed faces on top of darkness. I'm really glad I shot in RAW, as that combined with Lightroom's excellent exposure controls has allowed me to recover most of the shots, it seems the dark ones respond fairly nicely to exposure of +1.8-2.2 and a hit of fill light around +19 to bring out some of the background and the details in the suites.

Not a huge loss after all thank goodness :) The first pass on the images I've been making shows that most are recoverable, and some are actually not bad.

Things to remember for next time.

  • Consider not using a flash. Better yet, remember how to set it to only do fill flash mode, instead of just on P-TTL or the high speed sync mode.
  • Take test shots first to get the lighting and exposure right. The LCD will not give you the full story. Luckily I had the over/under exposure warning set, so I could see when the really-dark turned into pure-black, but the rest of the images were for the most part, still too dark.
  • Taking the time to zoom in and check the histogram would have avoided some stress.
  • Scope out the area ahead of time if possible. They have a gorgeous yard that I wasn't able to take full advantage of.
  • Get closer, get closer, get closer! Then get a bit closer. I'm so glad I have 14mp to work with!
  • I have to learn to know what looks good and how to get people to do it for me. Again, thank goodness that her mom was there and had an idea of what she wanted.
  • Remember to look for / fix the oven mitt hands.
  • Details, details, details.... I avoided trees growing out of heads for the most part, but little things like one person having their feet or hands pointed in a different direction than everyone else can take a picture down a notch.
  • Get more lines to get people to relax.... I think I used "pretend you like each other" about 30 times. First time good, 30th probably just annoying. I'll have to get a set of billy bob teeth to get a laugh.
  • Will HDR work to fix the white shirt / black dress issue? Hmm....
Will update when all the post-processing is done and will post some results when/if I get permission from parents in the form of a model release.